Stonly

How to measure your kitchen

You need a tape measure, paper and pen, and 10 minutes. The showroom takes the final measurements at the site visit, so don't worry if it's not 100% exact.

WallA: main wallB: side wallDepth
  1. 1

    Draw the kitchen from above

    One line for each wall that gets a countertop: straight, L or U. Mark the sink, cooktop and fridge.

  2. 2

    Measure each wall

    From the start of the cabinets to the end, in centimetres. In a corner, measure each wall up to the corner.

  3. 3

    Measure the depth

    From the wall to the front of the cabinet, plus 2 cm because the top overhangs a little. Usually 60 cm.

  4. 4

    Mark the cut-outs

    Number of sinks, cooktop type (built-in or freestanding), any extra tap hole.

  5. 5

    Decide on the backsplash

    A small 10 cm strip, a full backsplash up to the wall cabinets (about 60 cm), or none.

  6. 6

    Photograph the sketch and send it

    Take a photo in good light. Or type the lengths straight into the price calculator.

Common mistakes

  • Counting the corner twice: in an L kitchen the second run starts after the first run's depth. Type the full wall length; we do the maths.
  • Forgetting the fridge or a freestanding cooker: those spots get no countertop.
  • Using a cloth tape: it stretches. Use a steel tape.
  • Rounding too much: write the number as it is (243 cm, not 250).

Whatever you measure, the showroom measures again before cutting, and if the price changes you must approve it first.